Ready-mix concrete for the sub-2m³ jobs traditional suppliers do not service well. On-site batching, exact volumes, and small-truck access are built for reno sites, tight commercial pours, and staged jobs where a full agitator will not fit the site or the schedule.
We work with builders, tradies, and site managers on the smaller pours that sit awkwardly between DIY volume and full-load agitator work. Extensions, kerb and channel, fitout footings, fill-in pours, retail and hospitality slabs, civil landscaping. Part of our full concrete delivery range, alongside small batch concrete delivery and mini mix concrete delivery.
Get an instant quote or call 1300 880 955 for trade bookings.
Standard ready mix is set up for volume. Full agitator trucks run 6m³ or more per load, and if your pour is smaller than that, you are either paying for concrete you will not use, paying a small-load surcharge, or waiting on the truck while it services larger jobs first. On an active site, that gap costs time.
Our trucks are volumetric mixers, sized for the sub-2m³ end of the market, where much of the trade work sits. We arrive with cement, aggregate, water, and admixtures on board, batch to your exact spec at the site, and mix more mid-pour if the job runs long. Every mix runs to Australian Standards. If the job requires multiple loads during a shift, we run trucks back-to-back and stagger them to match your pour schedule.
For trade work that falls between DIY volumes and full agitator loads, this is the option most sites reach for: right-sized, on time, no waste.
We batch ready mix concrete at three standard grades, all produced to Australian Standards.
20 MPa for light-load pours, path work, non-structural infill, and general landscaping.
25 MPa for standard residential and light commercial slabs, driveway extensions, footings, retaining wall bases, and most reno work.
32 MPa for structural footings, workshop and warehouse floors, heavy-vehicle driveways, and commercial slabs designed for sustained load.
Custom slump on request. Set-accelerants available (we carry Sika Set and Rapidard) for cold-weather pours and fast-turnaround work where the pour needs to firm quickly. Useful for retail fitouts and overnight work where the site needs to be trafficable by morning.
Batch dockets and delivery documentation are available on request for jobs that need paperwork for site records, QA sign-off, or engineer certification. Mention the requirement when you book, so the crew brings what you need on the day.
Concrete Taxi trucks are 2.6 metres wide and 6 metres long. That is significantly narrower and shorter than a standard in-transit agitator, which changes what is possible on a site.
We fit through reno access points, down laneways, into inner-city sites with narrow driveways, and around builds where a full-size truck cannot manoeuvre without traffic control or crane assistance. Less setup, less time lost to logistics, less risk to finished surfaces on the site.
If the truck cannot reach the pour zone directly, we bring two wheelbarrows and leave them with you at no extra cost.
Each truck carries up to 2m³. For jobs bigger than that, we run multiple trucks back to back and time them to your pour schedule.
Common trade configurations:
Talk it through with the office before you book. Call 1300 880 955 with your job size, grades, and rough timing, and we will scope the fleet allocation with the nearest franchisee.
The fleet runs 24 hours a day, 7 days a week, including public holidays. That covers:
Rapid-set admixtures are available to help pours firm quickly on sites that need to be back in use by the following business day.
Ordering ready mix concrete as a trade user is straightforward.
Our ready-mix concrete covers the sub-2m³ end of the trade and commercial work most standard suppliers pass on or overcharge for. Common jobs:
If your job does not fit any of these neatly, call the office. Chances are, the local franchisee has done one like it.
Concrete Taxi runs a national franchise network with 12 service areas covering metro, suburban, and selected regional zones. Brisbane is our biggest service region.
Working across multiple sites in different service areas? The office can coordinate across franchisees. Call 1300 880 955, and we will scope it.
Ready mix concrete for trade work across Australia, batched fresh at 20, 25, or 32 MPa in the exact volumes and grades your job needs. Small-truck access, multi-truck staged pours, 24/7 booking, batch documentation on request, no small-load surcharge.
For single pours, run the volume through the instant quote calculator. For staged jobs, multi-truck bookings, or ongoing site work, call the office directly, and we will scope it with the nearest franchisee.
Get an instant quote or call 1300 880 955
We’d love to get in touch with you to help you order concrete and answer any enquiries you may have. Please leave your details below, and we’ll get back to you as soon as possible.